Can't quite believe I'm asking this....

I have an old desk-top PC that I'd like to inject a little zip into. One of the most obvious ways is to upgrade the processor. To do that I need to know what the processor is, adn therefore what socket type it is (its about a 3-4 year old pentium of some sort).

So, is there a simple way of finding our EXACTLY what the processor is without unpluggig and dismantling the PC? Is there a command or somesuch that'll tell me PRECISELY what the processor is - so I know what I might be able to replace it with?

Thanks.

[Decker]

My Computer
Right Click
Properties
General Tab

Oh god, I actually knew that already and didn't think it gave the actual Pentium model and speed. So, next question - any whiz here happen to know what type of socket a Pentium III (yes 3!)500Mhz is likely to be, and even vaquely modern processors might be able to replace it?????

Thanks all...

[Scrooge]

short answer...none...to be honest your best bet is to go out and buy a new computer.

however if you are still thinking about upgrading then here's what to do.

grab a new chip,im going to bet it's a socket 370,take a look on ebay,you should be able to find something in the 933 mhz-1.2 ghz range.

If you can find a Tualatin chip do NOT buy that,it requires it own mother board and yours will not support it.

You are going to need a new fan again on ebay.

no idea what how much memory you have,but add more,you should be able to find out wehat the mobo can handle from looking on the board,taking note of the model number,then a quick search on the net.

put in a new hard drive,get a good quality 7200 rpm hard drive and your good to go.

of course if you want to get real retro you could always throw a new /old videocard at it as well.

[RichardMannion]

Hi,

Use the Belarc Advisor - http://www.belarc.com/free_download.html - it will run and tell you lots of information about your PC.

Thanks,
Richard